LUXASHADEBioclimatic Pergolas
All the Sereno 700 — minus the wiring.
The motor is the part that breaks. Skip it. The Luxa Sereno 500M shares the exact 6063-T5 aluminium frame, the 115° louvre rotation, the QUALICOAT Class 2 powder coat, and the concealed drainage of the motorised Sereno 700 — and replaces the dual radio control drive with a precision gear-driven crank. One-handed, smooth, no creaks. The blades lock at any angle from sealed-tight to fully open. No wiring, no standby draw, no firmware to update. Same frame means upgradeability is built in: the day you want motorisation, a technician swaps the crank for a motor unit — no new structure, no re-install. Until that day, the 500M does what the 700 does without ever asking for a power outlet. Tested to EN 1991-1-1, 1-3 and 1-4. Documented for European project requirements. 98% recyclable aluminium, 25-year colour warranty.
TECHNICAL SPECIFICATIONSUse this product when the buyer wants adjustable bioclimatic shade without electrical preparation, automation or smart-home scope.
Sereno 500M suits terraces where simple manual control, the same aluminium frame language and low service complexity are more important than remote operation.
The quote should confirm the crank access side, drainage route, orientation and whether the project might later need lighting, heating or vertical ZIP screens.
Compare the manual route with motorised Sereno models before deciding whether the saving in electrical scope is worth the change in daily operation.
Compare manual, motorised and retractable roof routes before selecting a system.
Motorised alternativeUse Sereno 500 when remote control matters but the 700 feature set is not required.
Sun-zone plannerCheck whether manual louvre adjustment is enough for the terrace orientation.
Manual pergola quoteRequest pricing after dimensions, control side and drainage route are known.
Market routesOpen buyer-intent and country pages that connect this product family to project searches.
These answers help buyers understand when the manual bioclimatic pergola route is cleaner than motorised automation.
Luxa Sereno 500M is best used for terraces, country houses and secondary outdoor areas where adjustable louvres are needed but electrical preparation, motors and smart controls are not part of the brief.
Compare pergolas →Check module size, louvre orientation, drainage route, crank access side, frame colour and whether the project might later need ZIP screens, heating or lighting.
Check sun orientation →Choose a motorised Sereno model when daily operation is frequent, remote control matters or rain and wind sensor automation should be included from the start.
Review Sereno 500 →
Project wind review
No wiring — 40 cycles/charge
Horizontal under-roof UV screen
Frameless sliding glass room
Full-width opening bi-fold
Permanent facade louvres
No electricity needed
Bi-fold shutter, compact stack
Track-guided sliding panels
Accordion-fold, up to 6 m
APPLICATIONSThe Luxa 500M is specified for situations where electrical independence is not a compromise but a conscious choice. Garden pavilions set deep in landscaped grounds…
ACCESSORIES & ADD-ONSThe Luxa 500M accepts the same accessory range as the Luxa Sereno 700 — with the exception of motor-dependent automation. Available add-ons include integrated LED…
FREQUENTLY ASKED QUESTIONSWith a precision gear-driven crank handle. You turn the handle to rotate the louvre blades smoothly and effortlessly — no electricity, no wiring, no batteries required. The gear mechanism locks the blades securely at any angle between fully closed and 115° open.
The frame, dimensions, louvre range, drainage, and coating are identical. The only difference is the control method: the Luxa 500M uses a manual crank instead of an electric motor. This makes it more affordable and eliminates the need for electrical installation, but it cannot be integrated with smart home systems or automated weather sensors.
Yes. The Luxa 500M frame is designed with the same mounting points as the Luxa Sereno 700. A qualified installer can replace the crank mechanism with a motor unit at any time, converting the system to fully motorised operation with remote control and smart home compatibility.
Extruded 6063-T5 aluminium — the same alloy and frame system as the motorised Luxa Sereno 700. All joints use stainless steel fasteners. Every surface is finished with QUALICOAT Class 2 powder coat. Aluminium is 98% recyclable.
Standard modules: 3×3, 3×4, 3×5, 4×4, 4×5, and 4×6 metres. Maximum single-span width is 4 metres. Multiple modules can be coupled together for larger terraces. Custom dimensions on request.
Yes. When the louvre blades are fully closed, the roof forms a sealed waterproof surface. The integrated drainage system channels rainwater through concealed gutters inside the hollow columns — identical performance to the motorised Luxa Sereno 700.
The Luxa 500M shares the same structural frame as the Luxa Sereno 700; snow load is confirmed by EN 1991 project review. Higher requirements can be reviewed with additional support columns.
The manual version is ideal when: electricity is unavailable or costly to install at the location, you prefer zero electrical maintenance, you want a lower initial investment with the option to upgrade later, or when building regulations restrict electrical installations in certain zones.
Building permit requirements vary by country and region. In Germany, pergolas under 30 m² are often exempt in many Bundesländer. In France, structures under 20 m² typically require only a déclaration préalable. Always consult your local building authority. Your PONARC dealer provides structural calculations and documentation.
Clean the frame and louvres 2–3 times per year with water and mild soap. Clear drainage channels of leaves before autumn. Lubricate the crank mechanism annually with silicone-based lubricant. The powder coat does not require repainting.
The price varies by module size, colour, and configuration. The Luxa 500M is more affordable than the motorised Luxa Sereno 700 due to the simpler control mechanism. Request a personalised quote from your nearest PONARC dealer — consultation and measurement are free.
INSTALLATIONThe Luxa 500M can be installed freestanding on four or more columns or wall-mounted against an existing building. Freestanding installation requires concrete foundations…
COLOURS & FINISHESEvery Luxa 500M receives QUALICOAT Class 2 powder coating — exceeding GSB and Qualicoat standards for architectural aluminium. Choose from any RAL colour: popular…
CARE & MAINTENANCEThe Luxa 500M requires minimal maintenance. The QUALICOAT Class 2 powder coat resists UV degradation, salt spray, and atmospheric pollution — no rusting, no rotting,…
| Feature | Luxa Sereno 700 | Luxa Sereno 500M | Luxa Aperio 800 |
|---|---|---|---|
| Type | Bioclimatic louvered roof | Bioclimatic louvered roof | Retractable louvered roof |
| Louvre control | Motorised (remote + smart home) | Manual gear crank (no electricity) | Motorised rotate + slide |
| Louvre rotation | Up to 115° | Up to 115° | Up to 115° + full retraction |
| Open-sky option | No (louvres fixed in frame) | No (louvres fixed in frame) | Yes — louvres slide and stack |
| Max single span | 4.0 m | 4.0 m | 4.0 m |
