Aluminium Pergola Manufacturer Europe: System Selection for Architects and Specifiers.

Selecting an aluminium pergola manufacturer is a technical decision, not a purchasing one. Anyone specifying a system must evaluate load classes, certifications, coating quality, and system depth — not marketing imagery. This guide sets out the criteria a serious manufacturer must meet and where PONARC sits within that landscape.

---

What qualifies an aluminium pergola manufacturer

A pergola system fit for the European market must meet four technical baseline conditions.

First: EN 1991 compliance (Eurocode). The structure must have documented wind and snow load calculations under EN 1991-1-4 and EN 1991-1-3. Manufacturers unable to provide test reports are excluded from public and commercial projects. For private projects above 30 m² in most European jurisdictions, the same applies.

Second: Qualified surface treatment. Powder coating to GSB International or Qualicoat standard is the minimum. Qualicoat Class 2 — with enhanced UV and weather resistance — should be standard for outdoor structures with a design life exceeding 15 years.

Third: Alloy quality. Structural sections in 6063-T5 or 6060-T66 extruded aluminium are established practice. Heavier profile wall thicknesses (≥ 2.0 mm main beam) become relevant at spans above 4 m.

Fourth: Integrated drainage. Water must discharge entirely through hollow posts — no exposed downpipes, no run-off against the building facade.

---

The European market: three segments

Volume manufacturers with direct sales (e.g. PERGOLUX): Standardised modules, pallet delivery, self-assembly. Suitable for private single projects under 25 m². No specification documentation, no custom sizes.

European system houses (e.g. Brustor, Renson, Weinor): Full system suppliers with dealer networks across Europe. Established brands, premium pricing, production typically in Belgium or the Netherlands.

Production-oriented system manufacturers (PONARC / Alcodec): Own extrusion, coating, and assembly system. Direct relationship between production and the European dealer network. Shorter supply chain, tighter technical control.

---

PONARC system overview

PONARC is the European outdoor brand of Alcodec Alüminyum, a Turkish aluminium systems manufacturer with its own extrusion plant and certified coating line.

The product range covers three system families:

LuxaShade — Bioclimatic pergolas with adjustable louvre roofs (Luxa 700 motorised, Luxa 500M manual, Luxa 800 retractable, Luxa WG conservatory pergola). All models are calculated to EN 1991 and coated with TIGER Coatings powder. Standard modules: 3×3 m to 4×6 m; custom sizes on request.

VisioMod — Glass railing and aluminium balcony railing systems for residential and commercial construction. Frameless glass system FS7000, post-and-rail system with square post profile, aluminium fencing. Load class to EN 1991-1-1.

Alcodec System Profiles — Thermally broken facade and roller shutter profiles for dealers and fabricators.

---

Technical data: LuxaShade louvre systems

| Parameter | Luxa 700 | Luxa 500M | Luxa 800 | |---|---|---|---| | Drive | Motorised | Manual (crank) | Motorised + retractable | | Louvre angle | 0–115° | 0–115° | Fully retractable | | Structure | 6063-T5 aluminium | 6063-T5 aluminium | 6063-T5 aluminium | | Coating | TIGER Coatings, GSB | TIGER Coatings, GSB | TIGER Coatings, GSB | | Drainage | Through hollow posts | Through hollow posts | Through hollow posts | | Standard compliance | EN 1991 (Eurocode) | EN 1991 (Eurocode) | EN 1991 (Eurocode) | | Standard sizes | 3×3 to 4×6 m | 3×3 to 4×6 m | 3×3 to 4×5 m | | Starting price | from € 5,490 | from € 3,990 | from € 7,990 |

All systems are available in freestanding and wall-mounted configurations. Louvres are powder-coated in any RAL colour.

---

Specification documents: what manufacturers must supply

For commercial projects and public tenders, the following documents are required:

- Technical data sheet (profile cross-sections, wall thicknesses, material specifications) - Structural calculation to EN 1991 for the project-specific load zone - Coating certificate (Qualicoat or GSB) - CE Declaration of Conformity to EN 1090 (where load-bearing) - Installation drawing and foundation anchor specification

PONARC dealers receive these documents directly from the manufacturer for inclusion in tender packages.

---

Conclusion: system selection by technical criteria

The choice of aluminium pergola manufacturer should rest on measurable technical criteria: standards compliance, coating quality, supply chain stability, and specification-ready documentation.

PONARC meets these criteria as a production-oriented system manufacturer with its own extrusion operation. Dealers and planning offices can request technical documentation, sample profiles, and project support directly.

---

*Contact for planning enquiries and dealer partnership: ponarc.com/en/contact*