INSTALLATION GUIDE
8 steps to a finished bioclimatic pergola.
A motorised aluminium louvre roof that turns your terrace into a four-season room.
-
01
Place the foot plates
First action on the slab — anchor plates set the system footprint.
FOUNDATION52 min -
02
Lift the four columns
Lift the four columns onto the anchor studs — two installers per column.
FOUNDATION25 min -
03
Set the front carrier beam
Front carrier beam goes on first — the spine of the frame.
FRAME17 min -
04
Set the back carrier beam
Back carrier beam closes the front-to-rear span — keep beams parallel.
FRAME17 min -
05
Mount the left short beam
Left short beam ties the long beams — frame becomes self-supporting.
FRAME12 min -
06
Mount the right short beam
Right short beam closes the rectangle — measure both diagonals now.
FRAME12 min -
07
Insert the first lamel row
First row of lamels enters the rail — verify free rotation by hand.
LAMELS37 min -
08
Complete the lamel array
Complete the lamel array — final check before motorizing the system.
LAMELS30 min
About this bioclimatic pergola installation guide
Luxa Sereno 700 — Bioclimatic Pergola · LuxaShade aluminium roof family. 8 steps · 2 installers · Edition 2026.1.
EN AW-6063 T6 alloy · QUALICOAT class 2 powder coating · EN 1991-1-4 wind-load rated · RTS-compatible motor wiring on motorised variants.
Why follow the official PONARC × LuxaShade procedure
- EN 1991-1-4 · QUALICOAT class 2 · EN AW-6063 T6
- RTS-compatible motor wiring (motorised variants)
- Gutter slope 1.5% · drainage inside columns
- Edition 2026.1 · January 2026 · EN