INSTALLATIONSGUIDE
16 steg till en färdig Väggmonterad manuell bioklimatisk pergola.
Väggmonterad bioklimatisk aluminiumpergola med manuell vev — väggläkt PN-WM-500 ersätter den bakre fristående ramen, endast två främre pelare. Tre omkretsstorlekar från en gemensam 16-stegsprocedur.
-
01
Markera väggläktens linje
Mark the wall ledger line — the entire roof reference for a wall-mount install.
STOMME15 min -
02
Förankra väggläkten PN-WM-500
Anchor PN-WM-500 wall ledger — replaces the rear free-standing frame.
STOMME25 min -
03
Placera de två främre fotplattorna
Place the two front PN-FP-500 foot plates parallel to the wall ledger.
STOMME18 min -
04
Res de två främre pelarna
Lift the two front PN-DZ-500 pillars onto their foot plate studs.
STOMME22 min -
05
Montera främre bärränna
Install the front PN-GU-500 carrier gutter — match height to wall ledger ±2 mm.
STOMME18 min -
06
Montera siderännor (front till vägg)
Install left and right side gutters — wall-side ends fix to PN-WM-500 ledger.
STOMME22 min -
07
Täta hörnskarvar
Apply neutral-cure silicone bead at all four upper corner joints.
STOMME12 min -
08
Montera lamell-skenor (PN-RA-500)
Slide PN-RA-500 blade rails into the frame channels — pre-set pivot positions.
LAMELLER18 min -
09
Förbered lameller
Prepare the louvre blades (PN-LM-500 opening + PN-LM-501 fixed reference).
LAMELLER18 min -
10
Montera fast lamell (PN-LM-501)
Install the PN-LM-501 fixed lamella against the wall ledger — closed-position reference.
LAMELLER15 min -
11
Montera öppnande lameller (PN-LM-500)
Install the PN-LM-500 opening lamellas (back/wall side first) — equal pitch.
LAMELLER25 min -
12
Anslut manuell mekanism
Connect the manual synchronization linkage — all opening blades move together.
LAMELLER18 min -
13
Montera manuellt handtag (PN-HD-500)
Install the PN-HD-500 manual handle — front-side rail, smooth crank cycle.
LAMELLER18 min -
14
Ställ in ändstopp och montera kåpor
Set open / close end-stops and install front pillar caps + gutter closing profiles.
AVSLUTNING18 min -
15
Montera dräneringsutlopp och sluttest
Connect drainage outlets in front pillars and complete final functional test.
AVSLUTNING18 min -
16
Rengör och överlämna
Clean, demonstrate manual operation to customer, hand over warranty card.
AVSLUTNING12 min
Om denna väggmonterad manuell bioklimatisk pergola-installationsguide
Luxa Sereno 500M Wall — Väggmonterad manuell bioklimatisk pergola · LuxaShade aluminium roof family. 16 steps · 2 installers · Edition 2026.1.
EN AW-6063 T6 alloy · QUALICOAT class 2 powder coating · EN 1991-1-4 wind-load rated · RTS-compatible motor wiring on motorised variants.
Varför följa det officiella PONARC × LuxaShade-förfarandet
- EN 1991-1-4 · QUALICOAT class 2 · EN AW-6063 T6
- RTS-compatible motor wiring (motorised variants)
- Gutter slope 1.5% · drainage inside columns
- Edition 2026.1 · Januari 2026 · SV