GHID DE INSTALARE
16 pași până la un(o) Pergolă bioclimatică manuală de perete finalizat(ă).
Pergolă bioclimatică de perete din aluminiu cu manivelă manuală — riglă murală PN-WM-500 înlocuiește cadrul posterior independent, doar doi stâlpi frontali. Trei dimensiuni dintr-o procedură unică în 16 de pași.
-
01
Trasați linia riglei murale
Mark the wall ledger line — the entire roof reference for a wall-mount install.
CADRU15 min -
02
Ancorați rigla murală (PN-WM-500)
Anchor PN-WM-500 wall ledger — replaces the rear free-standing frame.
CADRU25 min -
03
Poziționați cele două plăci de bază frontale
Place the two front PN-FP-500 foot plates parallel to the wall ledger.
CADRU18 min -
04
Ridicați cei doi stâlpi frontali
Lift the two front PN-DZ-500 pillars onto their foot plate studs.
CADRU22 min -
05
Instalați jgheabul portant frontal
Install the front PN-GU-500 carrier gutter — match height to wall ledger ±2 mm.
CADRU18 min -
06
Instalați jgheaburile laterale (frontal spre perete)
Install left and right side gutters — wall-side ends fix to PN-WM-500 ledger.
CADRU22 min -
07
Etanșați îmbinările de colț
Apply neutral-cure silicone bead at all four upper corner joints.
CADRU12 min -
08
Instalați șinele lamelelor (PN-RA-500)
Slide PN-RA-500 blade rails into the frame channels — pre-set pivot positions.
LAMELE18 min -
09
Pregătiți lamelele
Prepare the louvre blades (PN-LM-500 opening + PN-LM-501 fixed reference).
LAMELE18 min -
10
Instalați lamela fixă (PN-LM-501)
Install the PN-LM-501 fixed lamella against the wall ledger — closed-position reference.
LAMELE15 min -
11
Instalați lamelele mobile (PN-LM-500)
Install the PN-LM-500 opening lamellas (back/wall side first) — equal pitch.
LAMELE25 min -
12
Conectați transmisia manuală
Connect the manual synchronization linkage — all opening blades move together.
LAMELE18 min -
13
Instalați manivela manuală (PN-HD-500)
Install the PN-HD-500 manual handle — front-side rail, smooth crank cycle.
LAMELE18 min -
14
Reglați limitatoarele și instalați capacele
Set open / close end-stops and install front pillar caps + gutter closing profiles.
FINISARE18 min -
15
Instalați ieșirile de drenaj și test final
Connect drainage outlets in front pillars and complete final functional test.
FINISARE18 min -
16
Curățați și predați
Clean, demonstrate manual operation to customer, hand over warranty card.
FINISARE12 min
Despre acest ghid de instalare pergolă bioclimatică manuală de perete
Luxa Sereno 500M Wall — Pergolă bioclimatică manuală de perete · LuxaShade aluminium roof family. 16 steps · 2 installers · Edition 2026.1.
EN AW-6063 T6 alloy · QUALICOAT class 2 powder coating · EN 1991-1-4 wind-load rated · RTS-compatible motor wiring on motorised variants.
De ce să urmați procedura oficială PONARC × LuxaShade
- EN 1991-1-4 · QUALICOAT class 2 · EN AW-6063 T6
- RTS-compatible motor wiring (motorised variants)
- Gutter slope 1.5% · drainage inside columns
- Edition 2026.1 · Ianuarie 2026 · RO