GUIDA ALL'INSTALLAZIONE
16 passaggi per completare un(a) Pergola bioclimatica manuale a parete.
Pergola bioclimatica a parete in alluminio con manovella manuale — il listello murale PN-WM-500 sostituisce il telaio posteriore autoportante, solo due pilastri frontali. Tre dimensioni da una procedura unica in 16 passaggi.
-
01
Tracciare la linea del listello murale
Mark the wall ledger line — the entire roof reference for a wall-mount install.
TELAIO15 min -
02
Ancorare il listello murale (PN-WM-500)
Anchor PN-WM-500 wall ledger — replaces the rear free-standing frame.
TELAIO25 min -
03
Posizionare le due piastre di base anteriori
Place the two front PN-FP-500 foot plates parallel to the wall ledger.
TELAIO18 min -
04
Sollevare i due pilastri anteriori
Lift the two front PN-DZ-500 pillars onto their foot plate studs.
TELAIO22 min -
05
Installare la grondaia portante anteriore
Install the front PN-GU-500 carrier gutter — match height to wall ledger ±2 mm.
TELAIO18 min -
06
Installare le grondaie laterali (anteriore verso parete)
Install left and right side gutters — wall-side ends fix to PN-WM-500 ledger.
TELAIO22 min -
07
Sigillare i giunti d'angolo
Apply neutral-cure silicone bead at all four upper corner joints.
TELAIO12 min -
08
Installare le guide delle lamelle (PN-RA-500)
Slide PN-RA-500 blade rails into the frame channels — pre-set pivot positions.
LAMELLE18 min -
09
Preparare le lamelle
Prepare the louvre blades (PN-LM-500 opening + PN-LM-501 fixed reference).
LAMELLE18 min -
10
Installare la lamella fissa (PN-LM-501)
Install the PN-LM-501 fixed lamella against the wall ledger — closed-position reference.
LAMELLE15 min -
11
Installare le lamelle mobili (PN-LM-500)
Install the PN-LM-500 opening lamellas (back/wall side first) — equal pitch.
LAMELLE25 min -
12
Collegare la trasmissione manuale
Connect the manual synchronization linkage — all opening blades move together.
LAMELLE18 min -
13
Installare la manovella manuale (PN-HD-500)
Install the PN-HD-500 manual handle — front-side rail, smooth crank cycle.
LAMELLE18 min -
14
Impostare i finecorsa e installare le coperture
Set open / close end-stops and install front pillar caps + gutter closing profiles.
FINITURA18 min -
15
Installare gli scarichi e test finale
Connect drainage outlets in front pillars and complete final functional test.
FINITURA18 min -
16
Pulire e consegnare
Clean, demonstrate manual operation to customer, hand over warranty card.
FINITURA12 min
Informazioni su questa guida all'installazione pergola bioclimatica manuale a parete
Luxa Sereno 500M Wall — Pergola bioclimatica manuale a parete · LuxaShade aluminium roof family. 16 steps · 2 installers · Edition 2026.1.
EN AW-6063 T6 alloy · QUALICOAT class 2 powder coating · EN 1991-1-4 wind-load rated · RTS-compatible motor wiring on motorised variants.
Perché seguire la procedura ufficiale PONARC × LuxaShade
- EN 1991-1-4 · QUALICOAT class 2 · EN AW-6063 T6
- RTS-compatible motor wiring (motorised variants)
- Gutter slope 1.5% · drainage inside columns
- Edition 2026.1 · Gennaio 2026 · IT