INSTALLATION GUIDE
14 steps to a finished wall-mounted glass / polycarbonate veranda.
Wall-mounted aluminium veranda with fixed glass or polycarbonate roof — winter-garden style cover, 14-step procedure with W (width) × P (projection) reference geometry.
-
01
Place the ground connections
First action on the slab — anchor the two ground connections, mark W × P footprint.
FRAME25 min -
02
Insert the pillars into the ground connections
Insert the front PN-VP-100 pillars onto ground connections — plumb in two directions.
FRAME18 min -
03
Fix the wall profile to the wall
Anchor PN-WP-100 wall profile at H1 / H2 height — laser-level the entire wall line.
FRAME25 min -
04
Install the front gutter profile
Install the front PN-GU-300 gutter profile between pillars — finger-tight first.
FRAME22 min -
05
Install drain tubes and drainers
Install drain tubes (PN-DT-100) and PN-WD-100 water drainers in the gutter.
FRAME12 min -
06
Prepare carrier fixing nuts
Pre-load PN-NT-080 channel nuts into all carrier-fixing positions.
FRAME12 min -
07
Insert the main carrier profiles
Insert main carrier profiles (PN-MC-100, PN-MC-110 mid-span) front to wall.
CARRIERS30 min -
08
Fix main carriers with brackets
Fix main carriers with PN-BR-300 brackets at both ends — bracket alignment critical.
CARRIERS25 min -
09
Insert cover profiles between carriers
Insert PN-CP-300 cover profiles between carriers — defines glass/polycarbon channels.
CARRIERS25 min -
10
Insert glass or polycarbonate infill sheets
Drop in PN-GL-300 glass or PN-PC-310 polycarbonate infill panels — handle with cups.
CARRIERS38 min -
11
Install main carrier covers and seals
Install main carrier covers and PN-GS-300 / PN-PC-300 seals — seals match infill type.
CARRIERS30 min -
12
Install optional gutter extension profile
Install optional PN-GE-300 gutter extension profile if specified.
FINISH18 min -
13
Install gutter and wall profile end covers
Install gutter and wall profile end covers (PN-EC-300) — clean visual close-out.
FINISH12 min -
14
Seal the wall joint and complete the system
Apply PN-SL-100 silicone at the wall joint and complete the system handover.
FINISH18 min
About this wall-mounted glass / polycarbonate veranda installation guide
Luxa Vetra — Wall-mounted glass / polycarbonate veranda · LuxaShade aluminium roof family. 14 steps · 2 installers · Edition 2026.1.
EN AW-6063 T6 alloy · QUALICOAT class 2 powder coating · EN 1991-1-4 wind-load rated · RTS-compatible motor wiring on motorised variants.
Why follow the official PONARC × LuxaShade procedure
- EN 1991-1-4 · QUALICOAT class 2 · EN AW-6063 T6
- RTS-compatible motor wiring (motorised variants)
- Gutter slope 1.5% · drainage inside columns
- Edition 2026.1 · January 2026 · EN