Luxa Sereno 500M Manuel Pergola med Lameltag

The frame, dimensions, louvre range, drainage, and coating are identical. The only difference is the control method: the Luxa 500M uses a manual crank instead of an electric motor. This makes it more affordable and eliminates the need for electrical installation, but it cannot be integrated with smart home systems or automated weather sensors.

Yes. The Luxa 500M frame is designed with the same mounting points as the Luxa Sereno 700. A qualified installer can replace the crank mechanism with a motor unit at any time, converting the system to fully motorised operation with remote control and smart home compatibility.

Extruded 6063-T5 aluminium — the same alloy and frame system as the motorised Luxa Sereno 700. All joints use stainless steel fasteners. Every surface is finished with TIGER Coatings powder coat. Aluminium is 98% recyclable.

Standard modules: 3×3, 3×4, 3×5, 4×4, 4×5, and 4×6 metres. Maximum single-span width is 4 metres. Multiple modules can be coupled together for larger terraces. Custom dimensions on request.

Yes. When the louvre blades are fully closed, the roof forms a sealed waterproof surface. The integrated drainage system channels rainwater through concealed gutters inside the hollow columns — identical performance to the motorised Luxa Sereno 700.

The Luxa 500M shares the same structural frame as the Luxa Sereno 700, rated for snow loads up to 150 kg/m² in standard configuration according to EN 1991. Higher ratings are achievable with additional support columns.

The manual version is ideal when: electricity is unavailable or costly to install at the location, you prefer zero electrical maintenance, you want a lower initial investment with the option to upgrade later, or when building regulations restrict electrical installations in certain zones.

Building permit requirements vary by country and region. In Germany, pergolas under 30 m² are often exempt in many Bundesländer. In France, structures under 20 m² typically require only a déclaration préalable. Always consult your local building authority. Your PONARC dealer provides structural calculations and documentation.

Clean the frame and louvres 2–3 times per year with water and mild soap. Clear drainage channels of leaves before autumn. Lubricate the crank mechanism annually with silicone-based lubricant. The powder coat does not require repainting.

The price varies by module size, colour, and configuration. The Luxa 500M is more affordable than the motorised Luxa Sereno 700 due to the simpler control mechanism. Request a personalised quote from your nearest PONARC dealer — consultation and measurement are free.